Rust removal made easy

Did You Know?

Rust remover without any 
health or environmental hazards

RUST REVENGE makes life easy by effectively removing rust with lower labour cost, low retraining cost & low preparations requirement. This liquid is non-corrosive, safe on multi-metals & seals. It has become a preferred rust remover in many industries because of its non-hazardous nature being a neutral pH and VOC & HAP free.

How to prepare for rust removal?

Clean & rinse the part before de-rusting. Rust Revenge does contain a surfactant to remove dirt, oil, and some greases, but if those are in excess, the rust removal may not be to its potential.

How to use rust remover?

Fully immerse the rusted part in the RUST REVENGE ready to use solution. Soak time recommended is 30 minutes to 24 hours, depending on the severity of rust, type of steel & temperature. Check progress after the first 30 minutes and so forth. No scrubbing is necessary.

What to do after rust removal?

Dry the part after removal from the bath. Apply NOX-RUST rust preventive oil or Daubert VCI packaging for intermediate to long-duration rust protection. If the part is required in a downstream process, rinse with water and proceed.